Making R2-D2 Part 4 // Electronics & Remote Control | I Like To Make Stuff

56

In this 4th installment of Making an R2-D2, we are adding the dome motor, the electronic brain, adding hinged panels, and syncing the remote control. Thanks to Express VPN for sponsoring this project. Go to https://expressvpn.com/makestuff and find out how you can get 3 months free.

TOOLS & SUPPLIES WE USED(affiliate links):
https://astromech.net
https://kit.co/iliketomakestuff/my-woodworking-tools
https://kit.co/iliketomakestuff/shop-safety-gear

MUSIC: http://share.epidemicsound.com/iltms
In this 4th installment of Making an R2-D2, we are adding the dome motor, the electronic brain, adding hinged panels, and syncing the remote control.

1. Install Dome Motor

In order to get Artoo’s head to spin, we will use the lazy susan we installed in a previous step. To get the large bearing to spin remotely, Josh cut a large circular gear rack and a smaller cog to turn it. The larger rack fit onto the lazy susan’s mounting hardware while the smaller cog and an accompanying bracket were attached to a small 12v DC motor. Once secured inside the body cavity, I could control the voltage to the motor and Artoo’s head was spinning! Now this feature will eventually be controlled through a wiring harness attached to a slip ring and connected to a control board. The slip ring prevents the wiring from getting twisted up inside the dome.

2. Print New Panel Hinges

First let me say, these hinges so far, have been the hardest part of this entire build. I bought the two-piece hinges that the astromech.org forums recommended but I could not get them to consistently work. The problem with Artoo’s hinged panels is that the dome panels are concave and sit at an angle. That means the a properly working hinge must be able to push the panel outward and clear the two-layer thick dome. The recommended hinges weren’t working and I struggled to find a suitable replacement. Someone recommended that I use a 3d-printable hinge set that came with the files for a mounting template. I was so happy when the first one worked perfectly. I printed a whole bunch of them and mounted all of the body and dome panels!

3. Connect the Electronic Brain

The electronic system for this droid is, surprise, complex. I’m sure I could eventually figure out how to do it all from scratch, but that is silly talk and totally unnecessary when a group of accomplished builders made it easy. Members on the astromech.org forums created a control system called “Shadow” which uses a single 18v battery to power the entire droid. There are systems that use 18v, 12v, and 5v so I had to connect several microcontrollers through volts regulators to power each subsystem. The Shadow’s Arduino sketch helps control all the different motors, the servos, load different sounds. It also has the bluetooth connectivity to a Playstation controller.

But Bob, He Still Needs Feet!

I know. I’m working on it. The feet, while not technically complex, are the most robust part of the droid because they take the most abuse. I am making them out of thicker aluminum so its taking longer.I wouldn’t have been able to any of this project without the amazing help of the builders on astromech.org. I’ll have certain pieces linked in this article, but I got all of the guidance, parts list, and specialty items from members in those forums. If you are interested at all in making your own R2-D2, go check them out.

Subscribe: http://bit.ly/ILikeToMakestuffSubscribe
Check out my TopVideos!: http://bit.ly/ILikeToMakeStuffTopVideos

Learn 3d modeling, get digital plans, and cool merch at
https://iliketomakestuff.com

Want to support ILTMS? Get exclusive content and more…
http://www.iliketomakestuff.com/patreon

FOLLOW:
http://instagram.com/iliketomakestuff
http://twitter.com/iliketomakestuff
http://facebook.com/iltms

#ILikeToMakeStuff

About I Like To Make Stuff:

We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!

These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you’ll see something here that will inspire you to make something that you’re passionate about!

Making R2-D2 Part 4 // Electronics & Remote Control | I Like To Make Stuff
https://www.youtube.com/watch?v=qlDWWugFml8

I Like To Make Stuff
http://www.youtube.com/Iliketomakestuff




Leave a Reply

Your email address will not be published.